BE600

Inquiry Overview | Features | Photos | Inquiry

The led FlareAlert Car Safety Light LED is especially designed for police, firefighters and rescue first responders to assist them during their work.

Feature:
Battery: 1 x 603048 900mA Lithium battery
Shelf-Life: 10 years
Source: 360 degree LED array: solid-state; no filament
Shock, vibration, and water-proof
Buoyancy Positive (Floats)
Operating Temps: Fahrenheit: -40 to 212 degrees
Emission source 360-degree
LED array: solid-state; no filament
Flash patterns:
1 – Rotate: 10 hours
2 – Quad flash: 10 hours
3 – Single blink: 50 hours
4 – Alternating blinks:10 hours
5 – SOS rescue (Morse code): 15 hours
6 – Steady on-high: 7 hours
7 – Steady on-low: 50 hours
8 – 2 LED flashlight: 30 hours
9 – 4 LED flashlight: 12 hours
Dimension: 4.25″  diameter x 1.25″ tall
ON: just press the switch button
OFF: press the switch button for a while
How to charge it?
1. Put the light on ground, back side is upturned
2.Take out the ellipse charger, put the charger onto the light as photo shows below, there has a + and mark on both of light and charger, face + to + and to -.
3. Connect the USB wire with the ellipse charger, now you can charger the light through the computer USB plug
4.If you want to charger the light through AC, please connect the AC charger
5.If you want to charger the light through car plug, take out the AC charger and connect the car charger instead

Source: 360 degree LED array: solid-state; no filament
Shock, vibration, and water-proof
Buoyancy Positive (Floats)
Emission source 360-degree

Super Flare LED Safety LightRechargeable led strobe lightroad LED Safety LightCar road Safety Light 9-In-1 Super Flare LED Safety LightLED emergency safety flare light Road Rechargeable safety light

Leave a Reply

X

My status